film shaping meaning in Chinese
薄膜成形
Examples
- 3 , during the process of the gear teeth meshing , the film shape and pressure distribution have little difference . but , the temperatures have the distinctive changes as the engaged position is varied , which means that the temperatures as the increase in the rate of slide to roll
3 、在齿轮传动啮合过程中，压力分布和油膜形状无明显变化，但温升随啮合位置的不同呈显著变化，即温升随着滑滚比增大而增大;在单、双齿啮合交替处，摩擦系数达到极值，可达0 . 08 。 - Applying the computer program developed by this paper , and choosing the real values of the gear transmission , this paper has completed more than 50 sets of calculations of the thermal elastohydrodynamic lubrication based on the non - newtonian fluid . the following conclusions can be drawn according to the computational results : 1 , when the gear teeth are engaged at the pitch point , the changes of both the gear rotational speed and the load have little influence on the pressure distribution and the film shape , but they have large influence on the film temperature distribution
应用本文研发的计算机程序，选用齿轮传动的实际参数，先后进行了50余组的基于非牛顿流体的热弹流润滑计算，所得的主要结论如下： 1 、当齿轮在节点啮合时，齿轮转速及载荷的变化对压力分布口太原理工大学硕士学位论文和油膜形状的影响不大，但对温度分布有明显的影响。 - Taking into account thermal and non - newtonian effects of the lubricant , this paper has theoretically investigated elastohydrodynamic lubrication of involute spur gears , and achieved the pressure distribution , film shape , temperature distribution and the values of the friction coefficient and its varying law along the line of action of gear transmission
本文在考虑了润滑剂的热效应和非牛顿效应后，对渐开线直齿轮的弹流润滑问题进行了理论研究，获得了齿轮传动的压力分布、温度分布、油膜形状和齿面摩擦系数的取值范围及其沿齿轮传动啮合线的分布规律。